PLEASE Remove this Thread New Thread (because of mod release) Information Simple Sprinkler changes the way sprinkler water your soil. You can chose between patterns and configure the range of the three sprinklers. Currently available pattern (sample with first sprinkler): Download Version 1.2: Required: [SMAPI OR STORM] Download SimpleSprinkler on GitHub Updating from 1.0 to 1.1: The config does not update completely, If you would like to use SimpleSprinkler in the Greenhouse see beneath for Configuration Installation: 1. Install ModAPI (Link above) 2. [SMAPI] Place SimpleSprinkler.dll in %APPDATA%/StardewValley/Mods folder 3. [SMAPI] Start "StardewModdingAPI.exe" Configuration: Start the ModdedGame once: Config will be generated into "<GameFolder>/Mods/SimpleSprinkler/Config.ini" Locations = Farm,Greenhouse This will limit the locations in which this mod works, if you don't want to have Simple Sprinkler active in the Greenhouse just remove it (and the ,) SprinklerConfiguration = 599/2,621/3,645/5 This can be used to either change the range of the sprinklers or to add even more objects to have them behave like sprinklers. e.g. you could add the scaregrow to this list and it will behave just like a sprinkler Format: objectID/Range Example: SprinklerConfiguration = 599/2,621/3,645/5,8/100 This will add the scarecrow as a sprinkler with a range of 100 CalculationMethod = 2 This can be used to change the pattern of the sprinklers. 0 = Vanilla 1 = Box 2 = Circle Source: Found on GitHub Current Known Bugs or missing Features: Suggested pattern: None yet Donations through Patreon possible, If you want. Expect more mods and updates when donating. More mods are in planning phase.